I accidentally got the paint on the glass. Generally, the glass is hard and smooth, and the adhesion of the paint is not very good. I can try to scrape it off with a blade. There is a kind of knife that may be better used: the carving straight knife used by the carver can be checked online according to this name. If it is sharpened, just push it off,
If it's frosted glass, it's a little difficult, but there are also ways: lay the glass flat, spread cotton cloth, and compact -- so that the cotton cloth can contact the paint on the glass. Then pour the paint remover, take off the cotton cloth every half an hour, and brush with a hard brush or brush dipped in the paint remover. If it can be brushed, it can be scraped with a blade (blade without blade), and then cover it with cotton cloth. If it is soft, brush or scrape again, and it will come down soon.
Glass paint for professional construction: the glass can be heated appropriately. Because the expansion coefficient of glass and glass paint is different, the layer will soon leave. At this time, a hole can be scraped at the edge to remove the next layer. You can also use the above method: paint remover
But when using paint remover, pay great attention not to contact with human skin. In case of contact, rinse immediately with plenty of water.
You can wipe it off with a hot towel stained with alcohol or paint thinner (wear gloves). It can also be removed by the following methods:
1. Using soap and a little mixture of ammonia and turpentine can remove a lot of dirt from the glass.
2. The surface can be removed by repeatedly sticking and tearing with a good adhesive transparent adhesive.
3. Wipe it off with a little dilute sodium water, or use paint thinner.
4. You can dry it with a hair dryer and then scrape it gently.
5. Wipe with a cotton swab dipped in nail washing water.
6. Wipe with essential balm.
7. Wipe with special cleaner or sports shoe detergent.
8. The 4B rubber used for drawing is a very soft Korean rubber, which can be wiped off.
